Double acting Hydraulic Jars

  • (HJDA) is a bi-directional drilling jar incorporating hydraulic delay without a latch mechanism.
  • HJDA is intended for use in highly deviated or high friction wells, where conditions may prevent applying sufficient force to release a mechanical latch.
  • Standard seals are suitable for use up to 250°F (120°C). Optional high temperature seal kits are available for service to 400°F (200°C)
  • Up to 400 rotating Hours before servicing is needed.
  • Jar Placement Software is in place to insure optimum jar Placement for maximum efficient Impact force.
  • Available Sizes : 4 ¾’’- 6 ½’’ – 8’’- 9 ½’’
Drilling 1

Double acting Hydraulic - Mechanical Jars

  • (HMJ) is a double acting jar, designed to deliver hydraulic delay when jarring up ,incorporates a latch mechanism to keep the jar locked in the neutral position and eliminate unexpected jarring while tripping or racking back and eliminate movement between jar components, increasing service life.
  • The hydraulic delay mechanism is located in a separate chamber to prevent contamination and increase reliability.
  • The spline drive and latch mechanism are enclosed in a single, sealed oil chamber without ports to the annulus.
  • Standard seals are suitable for use up to 250°F (120°C). Optional high temperature seal kits are available for service to 400°F (200°C).
  • Up to 400 rotating Hours before servicing is needed.
  • Jar Placement Software is in place to insure optimum jar Placement for maximum efficient Impact force
  • Available Sizes : 4 ¾’’ – 6 ½’’- 8’’ – 9 ½’’
Drilling 2

Shock Tools

  • Isolates bit induced vibrations from the drill string.
  • Fully oil-sealed and lubricated for extended service life.
  • Allows optimum bit speed to be used under rough drilling conditions, increasing the rate of penetration.
  • Does not use temperature-sensitive elastomers for shock absorption, therefore is suitable for use in temperatures to 250°F (120°C), with optional seals available for temperatures up to 320°F (160°C).
  • Up to 400 rotating Hours before servicing is needed.
  • Available Size : 4 ¾’’- 6 ½’’ – 8’’- 9 ½’’
Drilling 3

Roller Reamers

  • Fully customizable reaming and torque-reducing tool that improves borehole shape, size and quality.
  • Provides stabilization by centralizing the BHA, minimizing downhole vibrations, preventing the BHA from resting on the low side of the deviated hole, and reducing BHA fatigue.
  • Sealed Bearing Cartridge Design .
  • Cartridge life up to 1.5 Million String Revolution
  • Available Size : 6’’ up to 26’’
  • Roller reamer Cartridge Software available to determine optimum cartridge life and replacement time.
Drilling 4

Mud Motors

  • Increasing ROP and drilling performance.
  • Wide variety of motor configurations, bit speeds, flow ranges, and power outputs to suit different drilling application.
  • Adjustable bent housing 0-3 Degree Angle allow drilling either in sliding or rotary mode
  • Available in both Hard Rubber and ERT Power section.
  • Compact Unique Transmission and bearing Design.  
  • Available Size : 4 ¾’’- 5’’ -6 3/4’’- 7’’- 8’’- 9 5/8’’
Drilling 5

MWD Survey Tool

  • MWD survey tool designed to provide unmanned monitoring of wellbore deviation with/without direction. It provides an intermediate solution between time consuming and inaccurate wireline survey tools and expensive steerable MWD systems.
  • High torque, high wear rotary shear valve and provides increased reliability and durability in contaminated mud systems.
  • Has significantly superior tolerance to LCM and solids when compared to conventional pulser designs that utilize small screens and inlets which are susceptible to blockages.
  • Tool also provides Total Gravity Field, Total Magnetic Field and Dip Angle values, drastically reducing the risk of bad surveys. System health parameters such as downhole tool temperature and tool battery life are also transmitted. Surveys are initiated by simply cycling the mud pumps off and on.
  • The total survey time is less than 3 minutes.
  • It is touchscreen enabled and features an easy to use interface that can be mastered in minutes. The driller can view real-time graphs of pressure data and filtered pulse data, and can also visualize the wellbore using Vertical Section and Horizontal Section plots and view the entire wellbore in a fully animated 3D interface.
  • The MWD Survey System is logistically friendly and ships ready to run in a 12 ft nonmagnetic high strength stainless steel drill collar.
  • The entire system can be installed, initialized and operational in less than 30 minutes.
  • Available Sizes: 4 ¾’’- 6 ½’’- 8’’ – 9 ½’’